Flange Type Soft Seal Center Line Worm Gear Butterfly Valve Ductile Iron Stainless Steel

Product Description

 

Product Description

 Product Advantages

1. The structure is simple and compact, the rotation of 90 °is quickly to open and close.
2. All products can provide the pressure test: All CHAOJI products can provide the pressure test report before leaving the factory.
3. High performance seat rubber: The rubber content is 50%, and the switch life is more than 30000 times. The rubber and valve body are joined by vulcanization process, and the joint is tight and doesn't fall off;
4. Axial seal: The valve shaft has a double seal structure design of oil seal and O-ring, smaller torque and reliable seal; The upper and lower shaft holes of DN350 and above large diameter valves are designed with packing box structure, and the packing is pressed by the gland to realize sealing.
5. Surface coating: Epoxy powder coating is adopted, with strong adhesion and good weather resistance. It can be used indoors and outdoors.

Design standards
Design and manufacturing standards: GB/T 12238
Structure length standard: GB/T 12221
Test standard: GB/T 13927
Upper flange connection standard: ISO 5211
Flange size standard: GB/T 17241.6, ASME B16.5, ASME B16.47,
ASME B16.1, JIS B2220

Specifications:
Body Materials: Cast Iron, Ductile Iron
Disk Materials: Ductile Iron, Stainless Steel, Nylon 5/11 Coated Ductile Iron, Aluminum Bronze, Stainless Steel, Hastelloy, Halar Coated Ductile Iron
Stem Materials: Carbon steel, Stainless Steel, Monel
Seat Materials: EPDM, BUNA-N(NBR& Nitrile),FKM
Applications:  Potable Water, Wastewater, HVAC, Irrigation, Metallurgy, Power Generation, Chemical Process, Marine, Oil & Gas, Pulp & Paper, Bulk Solids, Mining, Food & Beverage Dead-End service
Material availability depends on valve size & series. Other materials are available. Please consult to us or your local AVANNTO representative for your specific condition.

Face-to-face:
EN 558 Series 13
ISO 5752 Series 13

Flange accommodation:
EN 1092 PN 6/10/16
ASME B16.5 / B16.47
ASME Class 150

Flange Surface Design:
EN 1092 Form A /B
ASME RF, FF

Top flange:
EN ISO 5211

Tightness check:
EN 12266 (Leakage rate A)
ISO 5208, Category 3

Working standard:
EN 593

Temperature range:
-20 °C to + 130°C (depending on pressure, medium and material)

Max. Operating pressure:
max. 16 bar

 

Product Parameters

DN		A	PN16		PN10		150LB		D2	L	B	φD3	φD4	n1-φd1	φD5
			D1	n-φd	D1	n-φd	D1	n-φd
2″	DN50	108	125	4-19	125	4-19	120.7	4-19	90	25	9	65	50	4-8	135
2.5″	DN65	112	145	4-19	145	4-19	139.7	4-19	110	25	9	65	50	4-8	135
3″	DN80	114	160	8-19	160	8-19	152.4	4-19	124	25	9	65	50	4-8	135
4″	DN100	127	180	8-19	180	8-19	190.5	8-19	150	28	11	90	70	4-10	135
5″	DN125	140	210	8-19	210	8-19	215.9	8-22.4	176	28	14	90	70	4-10	135
6″	DN150	140	240	8-23	240	8-23	241.3	8-22.4	200	28	14	90	70	4-10	135
8″	DN200	152	295	12-23	295	8-23	298.5	8-22.4	258	33	17	125	102	4-12	270
10″	DN250	165	355	12-28	350	12-23	362	12-25.4	310	33	22	125	102	4-12	270
12″	DN300	178	410	12-28	400	12-23	431.8	12-25.4	362	33	22	125	102	4-12	270
14″	DN350	190	470	16-28	460	16-23	476.3	12-28.4	421	45	22	125	102	4-12	270

 

DN		L	PN16		PN10		150LB		H	φd	K	φD2	φD3	n1-φd1	N-b
			D1	n-φd	D1	n-φd	D1	n-φd
16″	DN400	216	525	16-31	515	16-28	539.8	16-28.4	52	33.15	36.2	175	140	4-18	1-10
18″	DN450	222	585	20-31	565	20-28	577.9	16-31.8	52	38	41	175	140	4-18	1-10
20″	DN500	229	650	20-34	620	20-28	635	20-31.8	64	41.15	44.2	175	140	4-18	1-12
24″	DN600	267	770	20-37	725	20-31	749.3	20-35.1	70	50.65	54.7	210	165	4-22	1-16
28″	DN700	292	840	24-37	840	24-31	863.6	28-35.1	95	63.35	71.4	300	254	8-18	2-18
32″	DN800	318	950	24-40	950	24-34	977.9	28-41.1	95	63.35	71.4	300	254	8-18	2-18
36″	DN900	330	1050	28-40	1050	28-34	1085.8	32-41.1	130	75	84	300	254	8-18	2-20
40″	DN1000	410	1170	28-43	1160	28-37	1200.2	36-41.1	130	85	95	300	254	8-18	2-22
48″	DN1200	470	1390	32-49	1380	32-40	1422.4	44-41.1	150	105	117	350	298	8-22	2-28
56″	DN1400	530	1590	36-49	1590	36-44	1651	48-47.8	200	120	134	415	356	8-33	2-32
60″	DN1500	570	1710	36-57	1700	36-44	1759	52-47.8	200	140	156	415	356	8-33	2-36

Detailed Photos

Certifications

Customer Visits

 

Company Profile

 

Yuming Valve Group Co., Ltd. was found in 1972, covering an area of 82000 square meters industrial park, which was constructed 38000 square meters.
Yuming Valve Group Co., Ltd., a leading industrial valve manufacturing enterprise, is renowned for its exceptional product quality and top-notch customer service. Since its establishment in 1972, we have continually expanded and evolved into a sizable organization with over 700 employees, including more than 80 technical professionals.

We specialize in the research, manufacturing, testing, and sales of valves. Our core product is the ball valve, and in addition, we offer a range of other valve types, including safety valves, butterfly valves, gate valves, globe valves, check valves, and more. Our products find widespread applications in industries such as heating, petroleum, natural gas, chemical engineering, power generation, construction, water supply, and drainage, among others.

At Yuming Valve Group, our mission is to provide advanced valve solutions to our customers. Quality is our foremost priority, and we ensure the excellence of each valve through advanced manufacturing techniques and rigorous quality control systems. Our dedicated technical team is readily available to support our customers and provide comprehensive after-sales service to ensure the smooth installation and operation of our valves.

Whether you are seeking high-quality valve products or require professional technical support, Yuming Valve Group is committed to becoming your trusted partner. We look forward to establishing long-term collaborative relationships and meeting your valve needs and solutions.